sudo apt-get install -y  git cmake pkg-config libusb-1.0-0-dev

cd ~
git clone git://git.osmocom.org/rtl-sdr.git
cd rtl-sdr
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
sudo make install
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
sudo ldconfig

sudo nano /etc/modprobe.d/rtlsdr.conf

blacklist dvb_usb_rtl28xxu
blacklist rtl2832
blacklist rtl2830

sudo poweroff

lsmod | grep dvb_usb_rtl28xxu

cd ~
# pour utiliser openstreetmap et un server externe (lighttpd  ou nginx)
git clone https://github.com/mutability/dump1090  
cd dump1090
make

nano /home/pi/start_flight_radar.sh

#!/bin/sh
cd /home/pi/dump1090/
if [ -d "/run/dump1090" ]
  then
    echo "/run/dump1090 exists."
else
   sudo mkdir -p /run/dump1090-mutability
   sudo chown pi. -R /run/dump1090-mutability/  #droits pour utilisateur pi
fi
# Exécution
./dump1090 --net --ppm 0 --oversample --fix --phase-enhance --lat 47.27076 --lon -1.02527 --max-range 300 --net-http-port 0 --net-ri-port 30001 --net-ro-port 30002 --net-bi-port 30004 --net-bo-port 30005 --net-sbs-port 30003 --net-heartbeat 60 --net-ro-size 500 --net-ro-interval 1 --net-buffer 2 --net-bind-address 127.0.0.1 --stats-every 3600 --write-json /run/dump1090-mutability --write-json-every 1 --json-location-accuracy 2 --quiet&

chmod +x /home/pi/start_flight_radar.sh

cd ~
./start_flight_radar.sh

Mon Aug 27 15:01:17 2018 UTC  dump1090-mutability v1.15-dev-333-gfb5942d starting up.
Using sample converter: UC8, integer/table path
Found 1 device(s):
0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
Found Rafael Micro R820T tuner
Max available gain is: 49.60 dB
Setting gain to: 49.60 dB
Gain reported by device: 49.60 dB
Allocating 15 zero-copy buffers

curl 127.0.0.1:30003  # localhost est résolu en ipv6 (::1)

MSG,8,1,1,440735,1,2018/06/07,15:58:44.078,2018/06/07,15:58:44.129,,,,,,,,,,,,0
MSG,6,1,1,3B77EB,1,2018/06/07,15:58:44.085,2018/06/07,15:58:44.130,,,,,,,,1745,0,0,0,
MSG,8,1,1,440735,1,2018/06/07,15:58:44.089,2018/06/07,15:58:44.131,,,,,,,,,,,,0
MSG,4,1,1,440735,1,2018/06/07,15:58:44.190,2018/06/07,15:58:44.239,,,440,343,,,64,,,,,0
MSG,8,1,1,3C09F3,1,2018/06/07,15:58:44.282,2018/06/07,15:58:44.298,,,,,,,,,,,,0
MSG,8,1,1,3C09F3,1,2018/06/07,15:58:44.298,2018/06/07,15:58:44.348,,,,,,,,,,,,0
MSG,8,1,1,3C09F3,1,2018/06/07,15:58:44.314,2018/06/07,15:58:44.350,,,,,,,,,,,,0
MSG,7,1,1,3C09F3,1,2018/06/07,15:58:44.338,2018/06/07,15:58:44.353,,38000,,,,,,,,,,
MSG,8,1,1,3C09F3,1,2018/06/07,15:58:44.347,2018/06/07,15:58:44.402,,,,,,,,,,,,0

sudo pkill dump1090 #Appuyer 2 fois sur entrée pour récupérer le curseur

sudo apt install lighttpd

sudo mkdir -p /usr/share/dump1090-mutability/html/

sudo cp -r ~/dump1090/public_html/* /usr/share/dump1090-mutability/html/

sudo nano /etc/lighttpd/conf-available/89-dump1090.conf

# Allows access to the static files that provide the dump1090 map view,
# and also to the dynamically-generated json parts that contain aircraft
# data and are periodically written by the dump1090 daemon.

url.redirect += (
  "^/dump1090/$" => "/dump1090/gmap.html",
  "^/dump1090$" => "/dump1090/gmap.html"
)

alias.url += (
  "/dump1090/data/" => "/run/dump1090-mutability/",
  "/dump1090/" => "/usr/share/dump1090-mutability/html/"
)

# The stat cache must be disabled, as receiver.json changes
# rapidly and lighttpd's stat cache often ends up with the
# wrong content length.
server.stat-cache-engine    = "disable"

sudo lighty-enable-mod dump1090 # pour l'activation ou exécuter la ligne qui suit
# sudo ln -s /etc/lighttpd/conf-available/89-dump1090.conf /etc/lighttpd/conf-enabled/

sudo nano /usr/share/dump1090-mutability/html/config.js

// --------------------------------------------------------
//
// This file is to configure the configurable settings.
// Load this file before script.js file at gmap.html.
//
// --------------------------------------------------------

// -- Title Settings --------------------------------------
// Show number of aircraft and/or messages per second in the page title
PlaneCountInTitle = true;
MessageRateInTitle = false;

// -- Output Settings -------------------------------------
// Show metric values
// The Metric setting controls whether metric (m, km, km/h) or
// imperial (ft, NM, knots) units are used in the plane table
// and in the detailed plane info. If ShowOtherUnits is true,
// then the other unit will also be shown in the detailed plane
// info.
Metric = true;
ShowOtherUnits = true;

// -- Map settings ----------------------------------------
// These settings are overridden by any position information
// provided by dump1090 itself. All positions are in decimal
// degrees.

// Default center of the map.
DefaultCenterLat = 47.27076; //latitude antenne
DefaultCenterLon = -1.02527; //longitude antenne
// The google maps zoom level, 0 - 16, lower is further out
DefaultZoomLvl   = 8;

// Center marker. If dump1090 provides a receiver location,
// that location is used and these settings are ignored.

SiteShow    = false;           // true to show a center marker
SiteLat     = 47.27076;            // position of the marker
SiteLon     = -1.02527;
SiteName    = "Radar Site"; // tooltip of the marker

// -- Marker settings -------------------------------------

// These settings control the coloring of aircraft by altitude.
// All color values are given as Hue (0-359) / Saturation (0-100) / Lightness (0-100)
ColorByAlt = {
        // HSL for planes with unknown altitude:
        unknown : { h: 0,   s: 0,   l: 40 },

        // HSL for planes that are on the ground:
        ground  : { h: 120, s: 100, l: 30 },

        air : {
                // These define altitude-to-hue mappings
                // at particular altitudes; the hue
                // for intermediate altitudes that lie
                // between the provided altitudes is linearly
                // interpolated.
                //
                // Mappings must be provided in increasing
                // order of altitude.
                //
                // Altitudes below the first entry use the
                // hue of the first entry; altitudes above
                // the last entry use the hue of the last
                // entry.
                h: [ { alt: 2000,  val: 20 },    // orange
                     { alt: 10000, val: 140 },   // light green
                     { alt: 40000, val: 300 } ], // magenta
                s: 85,
                l: 50,
        },

        // Changes added to the color of the currently selected plane
        selected : { h: 0, s: -10, l: +20 },

        // Changes added to the color of planes that have stale position info
        stale :    { h: 0, s: -10, l: +30 },

        // Changes added to the color of planes that have positions from mlat
        mlat :     { h: 0, s: -10, l: -10 }
};

// For a monochrome display try this:
// ColorByAlt = {
//         unknown :  { h: 0, s: 0, l: 40 },
//         ground  :  { h: 0, s: 0, l: 30 },
//         air :      { h: [ { alt: 0, val: 0 } ], s: 0, l: 50 },
//         selected : { h: 0, s: 0, l: +30 },
//         stale :    { h: 0, s: 0, l: +30 },
//         mlat :     { h: 0, s: 0, l: -10 }
// };

// Outline color for aircraft icons with an ADS-B position
OutlineADSBColor = '#000000';

// Outline color for aircraft icons with a mlat position
OutlineMlatColor = '#4040FF';

SiteCircles = true; // true to show circles (only shown if the center marker is shown)
// In nautical miles or km (depending settings value 'Metric')
SiteCirclesDistances = new Array(50,100,150,200);

// Show the clocks at the top of the righthand pane? You can disable the clocks if you want here
ShowClocks = true;

// Controls page title, righthand pane when nothing is selected
PageName = "DUMP1090";

// Show country flags by ICAO addresses?
ShowFlags = true;

// Path to country flags (can be a relative or absolute URL; include a trailing /)
FlagPath = "flags-tiny/";

// Set to true to enable the ChartBundle base layers (US coverage only)
ChartBundleLayers = true;

// Provide a Bing Maps API key here to enable the Bing imagery layer.
// You can obtain a free key (with usage limits) at
// https://www.bingmapsportal.com/ (you need a "basic key")
//
// Be sure to quote your key:
//   BingMapsAPIKey = "your key here";
//
BingMapsAPIKey = null;

// Provide a Mapzen API key here to enable the Mapzen vector tile layer.
// You can obtain a free key at https://mapzen.com/developers/
// (you need a "vector tiles" key)
//
// Be sure to quote your key:
//   MapzenAPIKey = "your key here";
//
MapzenAPIKey = null;

sudo nano /usr/share/dump1090-mutability/html/gmap.html

cd ~
./start_flight_radar.sh #Appuyer sur entrée pour récupérer le curseur  
sudo service lighttpd reload

[ ok ] Reloading web server configuration: lighttpd.

cd ~
mkdir fr24
cd fr24/
wget https://dl.dropboxusercontent.com/u/66906/fr24feed_arm-rpi_242.tgz
tar zxvf fr24feed_arm-rpi_242.tgz

./fr24feed_arm-rpi_242 --signup

./fr24feed_arm-rpi_242 --fr24key=<key> --bs-ip=127.0.0.1 --bs-port=30003

nano /home/pi/start_flight_radar.sh

#!/bin/sh

# Dump1090
cd /home/pi/dump1090/
if [ -d "/run/dump1090" ]
  then
    echo "/run/dump1090 exists."
else
   sudo mkdir -p /run/dump1090-mutability
   sudo chown pi. -R /run/dump1090-mutability/  #droits pour utilisateur pi
fi
# 
./dump1090 --net --ppm 0 --oversample --fix --phase-enhance --lat 47.27076 --lon -1.02527 --max-range 300 --net-http-port 0 --net-ri-port 30001 --net-ro-port 30002 --net-bi-port 30004 --net-bo-port 30005 --net-sbs-port 30003 --net-heartbeat 60 --net-ro-size 500 --net-ro-interval 1 --net-buffer 2 --net-bind-address 127.0.0.1 --stats-every 3600 --write-json /run/dump1090-mutability --write-json-every 1 --json-location-accuracy 2 --quiet&

# Partage
cd /home/pi/fr24/
sudo pkill -f fr24feed
./fr24feed_arm-rpi_242 --fr24key=<key> --bs-ip=127.0.0.1 --bs-port=30003

sudo nano /etc/init.d/flightradar

#!/bin/bash
# /etc/init.d/flightradar
 
### BEGIN INIT INFO
# Provides: flightradar
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Flight Radar
# Description: Flight Radar (ADS-B Receiver)
### END INIT INFO
 
case "$1" in
start)
echo "Starting flightradar"
/home/pi/start_flight_radar.sh &
;;
stop)
echo "Stopping flightradar"
killall dump1090
;;
*)
echo "Usage: /etc/init.d/flightradar start|stop"
exit 1
;;
esac
 
exit 0

sudo pkill -f dump1090 #flightradar
sudo pkill -f fr24feed #partage

sudo service flightradar start

sudo service lighttpd restart

sudo systemctl stop flightradar
sudo systemctl disable flightradar

./dump1090 --help

-----------------------------------------------------------------------------
|                dump1090 ModeS Receiver         Ver : 1.10.3010.14         |
-----------------------------------------------------------------------------

--device-index <index>   Select RTL device (default: 0)
--gain <db>             Set gain (default: max gain. Use -10 for auto-gain)
--enable-agc             Enable the Automatic Gain Control (default: off)
--freq <hz>             Set frequency (default: 1090 Mhz)
--ifile <filename>       Read data from file (use '-' for stdin)
--interactive           Interactive mode refreshing data on screen
--interactive-rows <num> Max number of rows in interactive mode (default: 15)
--interactive-ttl <sec> Remove from list if idle for <sec> (default: 60)
--interactive-rtl1090   Display flight table in RTL1090 format
--raw                   Show only messages hex values
--net                    Enable networking
--modeac                 Enable decoding of SSR Modes 3/A & 3/C
--net-beast             TCP raw output in Beast binary format
--net-only               Enable just networking, no RTL device or file used
--net-bind-address <ip> IP address to bind to (default: Any; Use 127.0.0.1 for private)
--net-http-port <port>   HTTP server port (default: 8080)
--net-ri-port <port>     TCP raw input listen port (default: 30001)
--net-ro-port <port>     TCP raw output listen port (default: 30002)
--net-sbs-port <port>   TCP BaseStation output listen port (default: 30003)
--net-bi-port <port>     TCP Beast input listen port (default: 30004)
--net-bo-port <port>     TCP Beast output listen port (default: 30005)
--net-ro-size <size>     TCP raw output minimum size (default: 0)
--net-ro-rate <rate>     TCP raw output memory flush rate (default: 0)
--net-heartbeat <rate>   TCP heartbeat rate in seconds (default: 60 sec; 0 to disable)
--net-buffer <n>         TCP buffer size 64Kb * (2^n) (default: n=0, 64Kb)
--lat <latitude>         Reference/receiver latitude for surface posn (opt)
--lon <longitude>       Reference/receiver longitude for surface posn (opt)
--fix                   Enable single-bits error correction using CRC
--no-fix                Disable single-bits error correction using CRC
--no-crc-check           Disable messages with broken CRC (discouraged)
--phase-enhance         Enable phase enhancement
--aggressive             More CPU for more messages (two bits fixes, ...)
--mlat                  display raw messages in Beast ascii mode
--stats                 With --ifile print stats at exit. No other output
--stats-every <seconds> Show and reset stats every <seconds> seconds
--onlyaddr               Show only ICAO addresses (testing purposes)
--metric                 Use metric units (meters, km/h, ...)
--snip <level>           Strip IQ file removing samples < level
--debug <flags>         Debug mode (verbose), see README for details
--quiet                 Disable output to stdout. Use for daemon applications
--ppm <error>           Set receiver error in parts per million (default 0)
--help                   Show this help 

Debug mode flags: d = Log frames decoded with errors
D = Log frames decoded with zero errors
c = Log frames with bad CRC
C = Log frames with good CRC
p = Log frames with bad preamble
n = Log network debugging info
j = Log frames to frames.js, loadable by debug.html

lambda = c/f 

L=0.5*275mm*0.85=116 mm.

Bus 001 Device 004: ID 0846:9041 NetGear, Inc. WNA1000M 802.11bgn [Realtek RTL8188CUS]

sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

country=FR
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="YanHotSpot"
    psk="testingPassword"
}